Wood Magazine
Wood Store
Tool Reviews
Home / Woodworking Plans / Workshop & Jigs / Jigs & Fixtures

Jigs & Fixtures


Products 1-12 of 99
Show
Triple-duty workstation Woodworking Plan, Workshop & Jigs, Jigs & Fixtures, Workshop & Jigs, Tool Bases & Stands
Availability: In Stock
WOOD Magazine Item #: GR-01089 -

It's a sheet-goods cutting center. It's a panel glue-up station. It's an assembly table. And you can build it this weekend!Featured in WOOD Issue 235, October 2015

5 Essential Tablesaw Jigs Woodworking Plan, Workshop & Jigs Jigs & Fixtures
Availability: In Stock
WOOD Magazine Item #: GR-01057 -

Get dead-on crosscuts, create dadoes, cut pieces to identical length, make tight tenons, rip straight edges on boards—the list of jobs these jigs can tackle goes on and on. Using only a half-sheet of 3/4" plywood and some jig hardware, all five jigs should take only a weekend. And from there forward, you'll realize it was a weekend well spent, as these jigs help improve and expand your woodworking.Featured in WOOD Issue 231, March 2015 ...

Miter Shooting Board Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $3 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-01051 -

The difference between an ill-fitting miter and a gap-free one can be as small as a single plane shaving. This quick-to-build miter shooting board gives you the means to take just a whisper off your workpiece while trimming the angle of the miter dead-on.Featured in WOOD Issue 230, December/January 2014/2015 ...

Extending Tablesaw Stock Support Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-01046 -

Breaking down unwieldy sheet goods or crosscutting an especially long piece without sufficient support can be awkward and dangerous. Add this simple, easily adjustable extension support built from dimensional lumber to your tube-style tablesaw fence, and you'll find those cuts a breeze to make.Featured in WOOD Issue 229, November 2014 ...

Job-site Tablesaw Crosscut Sled Woodworking Plan, Workshop & Jigs Jigs & Fixtures
Availability: In Stock
WOOD Magazine Item #: GR-01041 -

This simple sled doubles the crosscut capacity of most job-site tablesaws while improving the cut quality. The sled coasts smoothly on waxed runners, the offcut plate catches waste pieces, and shop-made toggles keep both plates firmly attached to your saw (but quick to remove).Featured in WOOD Issue 228, October 2014 ...

Miter-sanding Jig Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-01031 -

Clamp this handy jig on your disc sander's table and use either the 90° or 45° side of the fence to square up or miter boards.Featured in WOOD Issue 227, September 2014

Infeed/Outfeed Stock Support Woodworking Plan, Workshop & Jigs $2 Shop Plans Workshop & Jigs Jigs & Fixtures
Availability: In Stock
WOOD Magazine Item #: GR-01024 -

Supported by a pair of adjustable roller stands, this stock-supporting fixture butts against the outfeed end of your bandsaw or tablesaw to prop up your workpiece before it can drop.Featured in WOOD Issue 226, July 2014 ...

Router-Table Pushblock Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-01004 -

Vertical panel-raising bits let get by with a lower-powered router. The tradeoff? You have to stand panels on edge to make the cut. Use this pushblock in its vertical position to for secure no-wobble control. As a bonus, it flips down for regular horizontal routing as well.Featured in WOOD Issue 223, December/January 2013/2014 ...

Small-parts Tablesaw Sled Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-00998 -

Hold small parts securely, safely, and dead-square to the blade for clean and super-accurate cuts on your tablesaw.Featured in WOOD Issue 222, November 2013

Bandsaw Circle Jig Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-00979 -

This well-rounded bandsaw add-on saws circles form 2" to 44" in diameter and can easily be made from scrap you have on hand.Featured in WOOD Issue 219, July 2013

Mortising Jig Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-00967 -

This clever router jig is self-centering for perfectly placed mortises. Additionally we demonstrate a loose-tenon joinery technique, a joinery method featuring a piece of wood—the tenon—inserted into matching mortises. Just as strong as a joint made with integral tenons, loose-tenon joinery trumps traditional mortise-and-tenon construction in several ways.Featured in WOOD Issue 218, May 2013 ...

Pipe-clamp Risers Woodworking Plan, Workshop & Jigs Jigs & Fixtures Workshop & Jigs $2 Shop Plans
Availability: In Stock
WOOD Magazine Item #: GR-00965 -

With a little help from your bench dogs, these easy-to-build helpers make it a breeze to control your pipe clamps during a glue-up.Featured in WOOD Issue 218, May 2013